Where To Place The Jack On A Jeep Wrangler: Essential Tips for Changing a Tire Safely!

Where To Place The Jack On A Jeep Wrangler

A photo showing where to place the Jack on a Wrangler - where to place the jack on a jeep wrangler
where to place the jack on a jeep wrangler Image source: Jk forum

 

The Jeep Wrangler, is an iconic vehicle renowned for its stunning appearance both on and off the road.

One requires specific knowledge to jack it up in case of a flat tire.

We’ve conducted thorough research to identify the precise locations for jacking your Jeep and provide you with the necessary answers to your inquiries.

 

Where To Place The Jack On A Jeep Wrangler

 

When you require jacking for your Jeep Wrangler, position the jack beneath the axle tube near the problematic tire, ensuring proper engagement before lifting the vehicle.

The Wrangler’s jack and lug wrench are typically stored under the cargo area floor.

This article will delve into the comprehensive process of jacking and changing a tire for the Jeep Wrangler.

Additionally, it will explore the location of the jack kit in recent Wrangler models and options for obtaining a replacement.

 

Where Do I Place The Jack Under My Jeep Wrangler?

 

In case your Wrangler experiences a flat tire, it’s important to know how to safely jack it up to utilize the spare tire conveniently stored at the rear of your Jeep.

As per the owner’s manual, the recommended jacking point for your Jeep Wrangler is the axle tube.

This component is robust and provides sufficient support for safely elevating your Wrangler.

 

How To Change A Tire On A Jeep Wrangler

 

An image of a tire being changed - Where To Place The Jack On A Jeep Wrangler
Where To Place The Jack On A Jeep Wrangler | photo credits: Mopar

 

  1. Park your Jeep Wrangler on a flat surface and turn off the engine. Ensuring the surface is level enhances safety and prevents accidents, especially in icy or slippery conditions.
  2. Engage the parking brake and activate hazard lights to secure your vehicle and alert other drivers, ensuring a safe working environment.
  3. Optionally, place chocks or wooden blocks on the tire diagonal from the flat tire to stabilize the vehicle during jacking, especially considering most of the weight will be on this tire.
  4. Retrieve the jack and lug wrench located under the floor in the cargo area of your Wrangler.
  5. Remove the spare tire from the back of your Jeep using the lug wrench. If applicable, remove any tire cover using the wrench located inside the centre console.
  6. Loosen the nuts on the flat tire, ensuring they are not completely removed at this stage to maintain stability.
  7. Position the jack under the axle tube next to the flat tire, ensuring it is securely engaged.
  8. Gradually lift the Wrangler by turning the jack screw clockwise, providing enough clearance to remove and replace the tire. Exercise caution as lifting too high can reduce stability.
  9. Remove the flat tire by finishing the removal of the lug nuts.
  10. Install the spare tire, ensuring the valve stem points away from the vehicle, and hand-tighten the lug nuts.
  11. Lower the vehicle by turning the jack screw counterclockwise until the Wrangler is securely on the ground.
  12. Using the lug wrench, finish tightening the lug nuts, ensuring they are as tight as possible. Consider using a torque wrench for precise tightening or have the tightness checked at a dealership or service station if necessary.

 

 

In What Part Of The Jeep Wrangler Is The Jack Located?

 

Finding the jack in your Jeep can sometimes be a challenge. But with recent model years, it’s typically located in the back, under the cargo area.

To locate the jack, start by lifting the load floor in the cargo area. You’ll find the handle for this near the rear of the vehicle.

Once the load floor is lifted, you’ll see a small compartment, often empty, which is for additional storage, not where the jack is located.

Between that compartment and the rear of the vehicle, there’s the hardware storage area.

Although it’s covered with plastic, you can easily access it by pushing a latch on the left-hand side and pulling up.

Inside this compartment, you’ll find the jack toolkit. Sometimes, you may need to loosen a wingnut attached to the kit to access it fully.

 

What’s The Weight Of The Jeep Wrangler?

 

While the Jeep Wrangler boasts its unique appearance, it falls under the SUV category.

Similar to other SUVs, the Wrangler tends to have a heavier weight compared to smaller cars.

However, it remains lighter than many larger SUVs.

For instance, the 2022 Wrangler Sport 2-door with 4WD weighs around 3,948 pounds with a gross vehicle weight rating of 5,000 pounds.

Although these weights are fairly standard across Wrangler models, variations exist based on factors such as model years, trim levels, and configurations.

When determining your vehicle’s weight, it’s advisable to prioritize the gross vehicle weight rating over the curb weight for safety reasons.

 

Frequently Asked Questions

 

Can I Jack Up My Jeep On The Differential?

 

Here’s our firm stance on the debate: refrain from jacking up your vehicle by the differential unless explicitly recommended by the manufacturer.

Regardless of what your neighbour advises or what you’ve observed tire shop personnel doing swiftly without incident, safety should always be the top priority.

 

How Do You Put A Jack Stand On A Jeep Wrangler?

 

It’s generally recommended to place jack stands on the axle tubes near the shock mounts for stability and safety when working under a vehicle.

Some also suggest using the frame as a support point.

For jacking up the vehicle, a floor jack can be positioned under the rear differential and either the front differential or the axle next to the front differential, as it’s slightly off-centre.

However, it’s important to follow the manufacturer’s recommendations outlined in the vehicle’s manual for proper jacking and support points to ensure safety and prevent damage to the vehicle.

 

 

Conclusion

 

In conclusion, mastering the art of jacking up your Jeep Wrangler is essential for handling unexpected flat tires efficiently.

By following the precise instructions and understanding the recommended jacking points, you can ensure safety and expedite the tire-changing process.

Remember to always prioritize safety and adhere to the manufacturer’s guidelines to prevent accidents and vehicle damage.

With the right knowledge and preparation, you can confidently tackle tire-related challenges and keep your Jeep Wrangler adventure-ready at all times.

Leave a Comment