How To Turn On Blind Spot Monitoring Jeep Cherokee. Discover Safe Drive Tricks!

How To Turn On Blind Spot Monitoring Jeep Cherokee

Lane assist - How to turn on blind spot monitoring jeep cherokee
How to turn on blind spot monitoring jeep cherokee | Photo credit: East Hills Jeep

If you’ve recently become the new owner of a Jeep Cherokee and are fortunate enough to have blind-spot monitoring, you might be curious about its functionality.

Do you need to activate it, and if so, how do you do that? Let’s explore.

The Jeep Cherokee Blind-Spot Monitoring (BSM) system utilizes sensors to monitor the surrounding area of your vehicle.

To activate or deactivate it, follow these steps:

  1. Press the Up/Down arrows on the steering wheel.
  2. Navigate to settings.
  3. Select driver assist.
  4. Locate and select blind spot.
  5. Toggle the switch to turn it on.

Blind-Spot Monitoring proves to be a valuable system, aiding in accident prevention.

In this article, we’ll delve into the workings of the BSM system.

 

How To Turn On Blind Spot Monitoring Jeep Cherokee

 

The Jeep Cherokee comes equipped with Blind-Spot Monitoring (BSM) as a standard safety feature.

By default, the BSM system activates every time the vehicle is turned on.

If the BSM system has been deactivated, you can easily reactivate it by following the aforementioned steps.

Upon starting the Jeep Cherokee, the Blind-Spot Monitoring system will illuminate your side mirrors, indicating its activation.

Utilizing sensors, the system continuously monitors the surrounding area of your vehicle and alerts you to any objects in your blind spot.

For the system to operate, the vehicle must be travelling at speeds of 6 mph or higher. Otherwise, it will not detect any obstructions in your blind spot.

The presence of a vehicle in your blind spot will be indicated by the corresponding side mirror light.

Furthermore, if you signal for a lane change while a vehicle occupies your blind spot, the light will flash accompanied by an audible warning. This ensures you’re informed of the potential hazard before maneuvering.

With Blind-Spot Monitoring, there’s no need for manual checks over your shoulder. This is because the system efficiently takes on that task for you, enhancing safety on the road.

 

Is Blind-Spot Monitoring Worth It?

 

Only you can decide whether Blind-Spot Monitoring is right for you.

This safety feature comes standard on the Jeep Cherokee, meaning it’s already factored into the vehicle’s price.

Statistics show that approximately 10% of accidents occur due to lane-changing maneuvers. Thus underscoring the importance of measures to enhance safety.

Blind-Spot Monitoring offers an added layer of protection by providing audible warnings when a vehicle is detected in your blind spot, potentially averting these types of accidents.

For those frequently navigating busy thoroughfares, Blind-Spot Monitoring proves invaluable. It instils a sense of confidence and actively prevents potential collisions.

It’s worth noting that while the feature is included in your Cherokee, you’re not obligated to use it.

Traditional methods like checking your blind spot manually by looking over your shoulder remain an option.

Yet, embracing Blind-Spot Monitoring introduces convenience and, more importantly, can be instrumental in saving lives.

 

 

What Are Blind Spot Sensors Called?

 

BSM systems utilize radar or ultrasonic sensors positioned in the vehicle’s rear bumper to detect vehicles in blind spots.

These sensors emit waves that bounce off objects and return to the sensor.

When an object is present in the blind spot, the waves bounce back to the sensor. This triggers a warning light on the side mirror.

In some cases, cameras are employed instead of sensors, leading to variations in terminology such as Blind-Spot Detection (BSD) or Rear Cross Path Detection (RCPD).

 

What Are The Drawbacks Of Blind-Spot Monitoring?

 

Blind spot detection systems have several drawbacks.

Firstly, they are less effective at slower speeds since they are optimized for highway driving.

Secondly, warning lights, usually located on side mirrors, may be difficult for some drivers to notice due to their small size.

Additionally, adverse weather conditions such as debris or snow covering the sensors can impede their functionality.

Lastly, these systems may struggle to detect smaller objects like bikes or motorcycles, which can be particularly problematic in busy urban environments.

 

Where Does The Blind Spot Detection Zone Begin?

 

The blind-spot detection zone commences at the rear of the vehicle and extends approximately 10 feet beyond the rear bumper.

When a vehicle approaches from the side, rear, or front and comes within 10 feet of the car, the system activates. It signals with a warning light on the corresponding side mirror.

Side mirror sensor - How to turn on blind spot monitoring jeep cherokee
How to turn on blind spot monitoring Jeep Cherokee | Photo credit: Amazon

 

The colour of the light, whether yellow or red, varies depending on the vehicle.

For instance, if the turn signal is activated while the BSM is operational, a bright flash indicates a vehicle in the blind spot.

Additionally, some vehicles emit an auditory alert to notify the driver of an object in their blind spot.

It’s crucial to note that the BSM may not detect motorcycles or bicycles.

Therefore, it’s advisable to visually confirm that the lane is clear before changing lanes, even if the BSM light is not illuminated.

 

Frequently Asked Questions

 

How Much Does It Cost To Add Blind-Spot Detection?

 

Adding the Blind-Spot Monitoring system to an older Jeep Cherokee requires purchasing parts and labour. They vary in cost from $250 to $500 or more depending on the system.

Therefore, you might consider whether it’s worth having it added.

If you frequently drive in congested areas, investing in this feature could be beneficial.

Additionally, if you prefer not to purchase a newer Jeep Cherokee, adding it could lead to long-term savings.

Conversely, if you’re currently shopping for a newer Jeep Cherokee, be aware that the vehicle already includes Blind-Spot Monitoring in its price.

Hence, there’s no need to worry about adding it separately.

 

Do All Cars Have Blind Spot Sensors?

 

 

Not all cars come equipped with blind-spot sensors.

Blind-Spot Monitoring is generally a safety feature found in higher-end vehicles. Although its prevalence is increasing, it can now be found in some lower-priced vehicles as well.

If you’re considering buying a new car and are uncertain about whether the vehicle you’re interested in has blind-spot sensors, it’s advisable to inquire with the salesperson.

They can confirm whether the car includes this feature and address any other inquiries you may have about it.

 

Conclusion

 

 

In conclusion, turning on Blind Spot Monitoring on your Jeep Cherokee involves following a straightforward process that increases safety on the road.

By carrying out a few simple steps, you can ensure that this valuable feature operates effectively. It offers an added layer of protection against potential hazards.

Moreover, being aware of its limitations and understand its benefits empowers you to make informed decisions regarding its utilization.

Whether you contemplate adding it to an older vehicle or appreciate its integration in a newer model, Blind Spot Monitoring provides peace of mind and contributes to safer driving experiences.

Leave a Comment