How To Reset Jeep Compass Oil? Say Goodbye to Annoying Maintenance Lights!

How To Reset Jeep Compass Oil

A photo of a Jeep Compass - How To Reset Jeep Compass Oil
How To Reset Jeep Compass Oil | Photo credits: Jeep

 

To reset the maintenance reminder light on a 2019 Jeep Compass, follow a straightforward procedure involving the ignition and accelerator pedal.

 

How To Reset Jeep Compass Oil

 

An image of a dashboard showing oil change required -How To Reset Jeep Compass Oil
How To Reset Jeep Compass Oil | Photo credits: YourMechanic Blog

 

To reset the oil light on a 2019 Jeep Compass, utilize the engine start/stop button by cycling the ignition to On/Run, press the accelerator pedal three times slowly, and then cycle the ignition back to the Off/Lock position.

When your Jeep indicates that it’s time to change your oil, it’s a crucial reminder to heed, as regular car maintenance can prevent costly repairs down the line.

However, after checking and changing the oil, it can be frustrating if the light persists, especially accompanied by a chime.

Different vehicles have various methods for turning off this indicator.

Sometimes, the process can be intricate, making it easy to forget between oil changes.

Fortunately, here’s everything you need to know about resetting the oil light in your 2019 Jeep Compass.

 

How To Reset The Engine Oil Maintenance Light On A Jeep Compass

 

Feeling annoyed by the persistent oil maintenance reminder in your Jeep Compass is understandable, especially with the accompanying chime every time you start the engine.

However, resetting the oil maintenance light serves a crucial purpose beyond just alleviating irritation—it ensures that the system accurately tracks intervals for future reminders.

When activated, the Oil Change Due message appears in the instrument cluster display for five seconds, accompanied by a chime, each time you switch the ignition to the On/Run position. Resetting it is a straightforward process:

  1. Press the Engine Start/Stop button without engaging the brake pedal.
  2. Cycle the ignition to the On/Run position, but refrain from starting the engine.
  3. Slowly depress the accelerator pedal fully, repeating this action three times within ten seconds.
  4. Return the ignition to the Off/Lock position.

Following these steps should reset the oil change light. However, if the light persists after restarting the car, repeat the procedure to ensure a successful reset.

 

 

How Often Does A Jeep Compass Need An Oil Change?

 

Jeep recommends scheduling an oil change for the 2019 Compass every 3,000 to 5,000 miles, or every 7,500 to 10,000 miles if synthetic oil is used.

While oil changes may not always seem urgent, they are crucial for maintaining the smooth operation of your Compass and preventing potential engine damage.

Having the oil changed at a repair shop typically costs around $100 per visit, and they usually reset the oil change light for you as part of the service.

However, if you opt to do it yourself by following the instructions in the owner’s manual, you can save money.

Just keep in mind that you’ll need to reset the oil change light yourself afterwards.

 

Frequently Asked Questions

 

How Do You Reset The Engine Light On A Jeep?

 

Resetting a Jeep’s check engine light is a simple process:

  1. Make sure your vehicle is turned off and open the hood.
  2. Locate the battery and find the negative terminal.
  3. Disconnect the negative terminal connector and keep it away from the terminal for approximately 30 to 60 seconds.
  4. Reconnect the negative terminal cable and securely tighten everything back up.

 

 

How Do I Reset My Uconnect 2018 Jeep Compass?

 

To perform a hard reset on Uconnect®, follow these instructions:

  1. Press the temperature up and down buttons simultaneously for at least five seconds.
  2. Navigate the menu that appears on the screen.
  3. Choose the option that prompts you to reset to factory settings.

 

How Do I Find My 4-digit Radio Code?

 

Here are some initial places to check for your radio code:

  1. Glovebox: Look for a sticker inside the glovebox that may display the radio code.
  2. Vehicle Handbook: Check your vehicle handbook under the stereo or security section. Some codes may be printed in the handbook. Additionally, there might be a small paper or plastic card inside the handbook containing the code.

 

Conclusion

 

In conclusion, resetting the oil maintenance reminder light on a 2019 Jeep Compass is a straightforward process involving the ignition and accelerator pedal.

It’s essential to heed this reminder for timely oil changes, ensuring the proper functioning of your vehicle and preventing potential engine damage.

While oil changes may seem like a minor task, they are crucial for maintaining your Compass’s smooth operation.

Additionally, following the recommended oil change intervals provided by Jeep helps to keep your vehicle in optimal condition.

 

Leave a Comment