How to Remove Jeep Doors: Ultimate Open-Air Freedom Guide!

how to remove Jeep doors


Image of a jeep without doors - How to remove Jeep doors.
How to remove Jeep doors | photo credit: Quora


Congrats on your purchase of a Jeep Wrangler or Gladiator!


Whether you prefer off-road adventures or city cruising, your Jeep offers a unique driving experience not commonly found in other vehicles.


Depending on the year and configuration, both the Jeep Wrangler and Jeep Gladiator are designed to allow the removal of their tops and doors, offering a true open-air experience.


With a few simple maneuvers, most tops can be easily popped off, but removing the doors might require a bit more effort.


So, get ready to enjoy the freedom of driving with the wind in your hair and the sun on your face!


What you’ll need to remove Jeep doors.


Not much is required to remove your Jeep’s doors, and you may already have everything you need in your vehicle’s maintenance kit.

Tool List:

  • Torx Wrench Set
  • Gloves
  • Rubber mallet

To save time, organize your tools and gear for easy reach, avoiding delays in the process.


Make sure that your workspace is flat, such as a garage floor, driveway, or street parking.


However, be sure to check local laws to avoid any violations when using street parking, as we wouldn’t want your ride to end up in trouble.


How to remove Jeep doors


Here’s a simple guide by Jeepcruisers on how to remove Jeep doors.


1. Side Mirrors Folding


Hand-folding is easily done for most Wrangler and Gladiator models’ mirrors.


This will allow you to store the doors with less chance of the mirrors being damaged in the process.


2. Window Rolling Down


Being able to reach inside the door to lift it up and off the vehicle makes access through the windows crucial.


If your doors are stuck in the up position, it’s possible to remove them without rolling down the windows, but it’ll be a bit more difficult.


3. Removal of the Black Safety Strap on the Jeep’s Doors


A black strap on the inside of the door jamb prevents the doors from swinging open too far.


The strap should be able to be simply removed without much effort.


4. Wiring Unplugging


If you bought a “luxury” Jeep with power windows and door locks, the wiring harness connecting the door’s electrical components to the vehicle needs to be unplugged.


5. Removal of Nuts and Bolts on the Jeep Wrangler’s Doors


Each door has a bolt forming part of the hinge assembly.


To get them out, the nuts holding each bolt in place should be removed.


Caution should be taken not to damage the paint during this process.


6. Jeep’s Door Being Pulled Up and Off the Car


Having the windows rolled down is helpful, as it allows you to reach in and grab the armrest to help pull the door up.


The door should not be grabbed where its hinges meet the Jeep’s body to avoid smashed fingers.


7. Safe Storage of Jeep’s Doors


Painted parts of your Jeep’s bodywork are being handled, so doors should not be dropped on the ground just anywhere.


8. Repetition of the Process with the Other Jeep Doors


The same process can be repeated with the other doors, including the rear doors for Wrangler Unlimited and Gladiator models.


The need to either reinstall the mirrors or anchor them to the Jeep’s body to stay legal should be kept in mind.


9. Disabling the Door Alarm and Light


The battery should be disconnected.


The fuse labelled Door Jamb Defeat should be located in the fuse box, typically situated low by the parking brake.


The fuse should be yanked out with a pair of needle-nose pliers and stored somewhere safe for replacement when the doors are reinstalled.


The battery should be reconnected, ensuring the battery cables are fully tightened onto the negative battery post.





FAQ on How To Remove Jeep Doors


Why do Jeep drivers take off their doors?


People nowadays remove Jeep doors for a variety of reasons.


One important reason is that it improves the driving experience, whether in town or on the open road.


Driving a Jeep with no doors provides a unique and cool experience that many people enjoy.


Furthermore, removing the doors can help to improve fuel consumption and reduce overall vehicle weight.


A lighter Jeep uses less fuel, which can result in cost savings at the pump.


How long does it take to take the doors off a Jeep?


It took 11 minutes to remove the first door, even without any prior knowledge.


While Jeep recommends having someone assist in lifting the door off the hinges, it is possible to do it alone if you can lift 47 pounds.


The smaller rear doors weigh only 34 pounds, and regardless, you can carry the window frame over your shoulder like a stylish, oversized metal handbag.


The subsequent doors were removed in just five minutes each.


How much longer is a 4-door Jeep than a 2-door?


An image of a 2-door and a 4-door jeep. How to remove Jeep doors.
How to remove Jeep doors | Photo credit: Dan Cummins site


The 4-door model’s wheelbase is about twenty inches longer, allowing the rear passengers to sit before the rear axle and wheel hump.


When the rear seats are folded down, the 4-door model offers a cargo space of 70.6 cu. ft., and when folded up, it provides 31.5 cu. ft.


On the other hand, the 2-door model has a cargo space of 56.5 cu. ft. with the rear seats folded down and 12.8 cu. ft. with the seats folded up.


Both Jeeps share identical height and width dimensions.


However, the 4-door version weighs approximately 200 lbs more than the 2-door version.


Consequently, the suspension on the 4-door utilizes a slightly higher rate spring to compensate for the extra weight.


Apart from that, the Jeeps are structurally very similar, but the additional length and weight on the 4-door model play a significant role.



The removal of Jeep doors is a straightforward process that can significantly enhance your driving experience.


Whether you prefer off-road adventures or city cruising, driving a Jeep without doors offers a unique and enjoyable sensation.


To start, ensure you have the necessary tools: a Torx Wrench Set, gloves, and a rubber mallet.


Organize your workspace on a flat surface, such as a garage floor or driveway, and ensure compliance with local laws if using street parking.


The step-by-step process begins with folding in the side mirrors to avoid potential damage during door removal.


Rolling down the windows provides access to lift the doors off the vehicle.


Remove the black safety strap on the Jeep’s doors, unplug the wiring if applicable, and proceed to remove the nuts and bolts from each door’s hinge assembly.


Carefully pull the door up and off the car, being cautious not to grab it where the hinges meet the Jeep’s body.


After removing the first door, subsequent doors can be removed even more quickly.


Store the Jeep’s doors in a safe location, taking care not to damage the painted bodywork.


Repeat the process for the other doors, including the rear doors for Wrangler and Gladiator models.


Before reassembling, disable the door alarm and light by disconnecting the battery and the Door Jamb Defeat fuse.


People remove Jeep doors for various reasons, such as to enhance the driving experience and reduce vehicle weight for improved fuel consumption.


Removing the doors can be accomplished in just minutes, and even the smaller rear doors can be handled solo.


The 4-door Jeep offers a longer wheelbase, providing more space for rear passengers and cargo, resulting in a slightly higher weight compared to the 2-door version.


Overall, the removal of Jeep doors offers a thrilling and practical modification for Jeep enthusiasts.



Leave a Comment